Where is your nozzle test
OK disregard my message - now I got it.
You need to fix that missing channel to get your proper test.
Check for air in the lines; damper; captop
Is the machine level
Is the head sitting squarely on the top
Try a powerful clean and then the nozzle test, if good then do the test
Which channel is missing? Not sure what I am looking for. Is it the clear tubes.
Chris your machine has 2 heads - 8 channels each.Your A side shows 8 channels, while your B side shows 6. You are missing a complete damper. Solve that and you will have the test print you are desiring.
I am looking for a picture of the layout of the ink tubes as they come to the heads. I purchased this machine and it was filed with cleaner. Not sure how the seller put cleaner in the lines. Printhead B or the right one has two cleaner lines attached while A or the left has none. You or anyone have a picture of the lines at the head location? Right side hood open.
Post your nozzle test and I will look for your color layout - which cartridges do you have currently. Cleaning cartridges can be used in any chamber and the printer will run as normal.
No nozzle test to post yet. Awaiting some parts. I was just looking for a picture of the lines going down to the heads to see if the guy did something weird. I have no cleaner lines running to head A or the left one and two running to B. This is from the cleaner cartridge plugged into the 8th slot.
Without seeing your nozzle test - no telling which of the 4 setups you have. Here is enough info to get you through.
I would look at the 8 color white/metallic system - with the 2 clears being used to hold the place for the special colors.
Thanks. Exactly what I need. Yes I have 2 clears being used to hold the place for the special colors. where can I buy the manual you got these images from?
You can't legally - the manual has secrets - search the internet - mine are from training and those extracts are not in violation since it is just showing ink layouts.