A Digital Printing Network
Been doing some reading... has ANYONE had exp with print head recovery? i have seen a bunch of info on this but wanted to talk to someone first hand.
Good Luck with everything
I would like to get a tech, the closest one is 4 hours away and i cant afford that call right now. I am waiting on my buddy to get available, he has a bunch of exp with this and thinks he can get me. I was hopping to get it up NOW~~ LOL thanks for all your info. Have a great night
I would go back to the flushing adjustment to make sure that's not the problem. Once that's done you can try other things but it is critical.
So you have a service manual or know the service code? You might be better off to get a tech in there.
OK, i am pulling from the cap lines where i conect them to the pump. (so pulling before the pump) the pump and lines seem clear because when i put cleaning solution on the caps it makes it way to the over fill bottle. I have plugged the lines before the pump so i can fill the caps with cleaning solution and park the heads and cap them for soaking. My buddy had a medical emergency that eventually prompeted him to stop using the printer. It has always been kept in his studio. i have yet to find any dried ink in the lines. I can pull ink through the lines to the dampers with a surringe. The dampers are not leaking and have fliuid in them.
try pulling from the bottom of the cap top before the pump. How was it stored? If there was ink in the pump for two years its toast.
where are you connecting the syringe?
Sign Upor Sign In
© 2013 Created by Steven Jackson - Admin.
Report an Issue |
Terms of Service
Please check your browser settings or contact your system administrator.