Well the European standard is the Max 3, so if you are using the original max ink and they have unloaded them from the site, not sure what to tell you. In the USA Roland has a tab for the originals and it is one click to get them all. What I can tell you is that the profiles can be used more than what they are stated for, so you can try them all until you get one that works. The only issue is if you need something to cut you need to use a profile that has a carrier or the cut feature is disabled. If it is vice versa then you can disable cut. Your issue is it is feeding too fast, so make a smaller test square and keep printing that using different profiles until one works. The other option is to change media but you already know that.