A Digital Printing Network
Versacamm 300sp Printing faded stripes
Hoping someone can help on this one. I just printed a104" piece of glossy wrap and the print has faded stripes.
Comment
-
Comment by DanielTF3 on June 24, 2012 at 7:38pm -
I had similar issues a few months back... I brought this problem up with our local buyer and was told to change heat settings on the type of media we were using. Heat, Vaccum settings and print head cleanliness were an issue in our case.
-
Comment by irving donaldson on May 22, 2012 at 10:00am -
Will try but not enough information.
Which machine
Cannot see the fading - so if you can point out and the direction
The material and profile used
The color management setting
The type of file and format - vector/raster eps/pdf/tif etc
Under printing settings are you using default media under all three
Have you set your calibration - light banding too fast - dark banding to slow
Have you set your bi-directional
Can you post a nozzle test
© 2013 Created by Steven Jackson - Admin.
You need to be a member of MyVersacamm.com to add comments!
Join MyVersacamm.com