"Will try but not enough information.
Which machine
Cannot see the fading - so if you can point out and the direction
The material and profile used
The color management setting
The type of file and format - vector/raster eps/pdf/tif etc
Under…"
A Digital Printing Network
marianne croxen's Discussions
color setting siser evolution
Started this discussion. Last reply by Carolyn Klages Feb 11. 2 Replies 0 Likes
Hi all,I am attempting to print t-shirt transfers.roland SP-300Colorip 2.1Siser Evolution Transfer MaterialThe colors are not coming out anywhere near what is displayed on the screen. Everything has…Continue
Colorip 2.2 Cuttin Off letters
Started this discussion. Last reply by marianne croxen Nov 21, 2011. 12 Replies 0 Likes
I just purchased a used SP-300. It came with a program called Colorip. I figured out most of it but am stumped at one thing. When trying to cut vinyl it keeps cutting off the last letter and cutting…Continue
Gifts Received
marianne croxen has not received any gifts yet
marianne croxen's Page
Latest Activity
marianne croxen posted a blog postVersacamm 300sp Printing faded stripes
Hoping someone can help on this one. I just printed a104" piece of glossy wrap and the print has faded stripes.
See More
Carolyn Klages replied to marianne croxen's discussion color setting siser evolution"I use the Colorprint PU Matte. I really like it. It's thin, flexible, has a nice white base point, and does stretch with stretchy garments. I especially like it on the moisture management tees. It really holds up well on…"
Kathleen Servais replied to marianne croxen's discussion color setting siser evolution"Our profiles were made to support Versaworks so you won't be able to install it with Roland's Color Rip. If your rip has a TTRH or generic vinyl option try that.
Siser also has a new material called ColorPrint PU Matte that you…"
marianne croxen posted a discussioncolor setting siser evolution
Hi all,I am attempting to print t-shirt transfers.roland SP-300Colorip 2.1Siser Evolution Transfer MaterialThe colors are not coming out anywhere near what is displayed on the screen. Everything has a brown tint. The greens are brown.I went on the Siser website and found a color profile you can download, but I have no clue what to do with it to make it work after it is downloaded and extracted.Any help will be much appreciated.thanks, marianneSee More
Butch commented on marianne croxen's blog post Need help with Roland Versacamm SP-300"Marianne, download the manual for ColorRip from the Roland site. It will explain step by step the right way to go about your jobs. First and foremost set up your machine properly before continuing. Do you env. match, your print calibrations ,…"
marianne croxen commented on marianne croxen's blog post Need help with Roland Versacamm SP-300"The material is an intermediate white vinyl. The files were printed together. I'm not in a jam, but I will send you the files so you can check them. As always thanks for your help!
I remember seeing a place on Colorip where you can choose the…"
Roland R. Irish III commented on marianne croxen's blog post Need help with Roland Versacamm SP-300"What type of material are you printing on? Did you print the two files together or as 'separate' jobs and reset Prepress/MaxImpact on them?
If you are in a jam for the order and I have the same material, I'd be glad to print it for…"
marianne croxen commented on marianne croxen's blog post Need help with Roland Versacamm SP-300"OK. So here i still sit. I thought I would try printing a .jpg and .eps of the same file to see if there are differences. Of course there are! The top print is .eps and the bottom is.jpg. The black is coming out super heavy. So wet that it takes a…"
marianne croxen replied to marianne croxen's discussion Colorip 2.2 Cuttin Off letters"Well I have no idea what happened, but I tried it again, starting from scratch and it worked fine. Even though it showed the line that looked like it was going to cut it off. Thanks for all the input!"
Roland R. Irish III replied to marianne croxen's discussion Colorip 2.2 Cuttin Off letters"I'm running Versaworks 3.0.2, and no such place for 'croppig left and bottom, h+w' that I can find. In file Preferences I found where I could change the EPS setting (I was told this was how to increase the border margin) and I can…"
Butch replied to marianne croxen's discussion Colorip 2.2 Cuttin Off letters"roland , from what I'm seeing in the manual you open file and size is to the left of the image - when you open size it will have cropping left and bottom and the image h+w - I don't use Color rip but have a manual copy."
Roland R. Irish III replied to marianne croxen's discussion Colorip 2.2 Cuttin Off letters"I have similar problem of the 'cropping' coming right up to the edge of printing-and no where do I see a 'size tab in upper left corner of main screen'. Do I find this without a job 'open' or with a job open? I've…"
Roland R. Irish III replied to marianne croxen's discussion Colorip 2.2 Cuttin Off letters"I have had the same problem, but I use Macromedia Freehand or Flexi 8 for Mac. Finally traced the problem to the artwork 'page'. In Flexi, if the contour path extends beyond the 'page size' then it will not fully 'cut'…"
Butch replied to marianne croxen's discussion Colorip 2.2 Cuttin Off letters"click size tab in upper left corner of main screen, a new dialogue box will open with sizing and cropping"
marianne croxen replied to marianne croxen's discussion Colorip 2.2 Cuttin Off letters"OK. So how do you change that? I dont see where it is adjustable."
Profile Information
- Hometown: Please include City & State
- madera ca
- Core Business
- Other
- Your Position
- owner / operator
- Website:
- http://www.croxenadvertising.com
- Type of Printer/Cutter if owned:
- roland sp 300
- Type of Heat Press if owned:
- knight
Marianne croxen's Blog
Versacamm 300sp Printing faded stripes
Posted on May 22, 2012 at 9:18am 1 Comment 0 Likes
Hoping someone can help on this one. I just printed a104" piece of glossy wrap and the print has faded stripes.
Colorip 2.2 Cutting off my letters
Posted on November 19, 2011 at 2:47am 1 Comment 0 Likes
I just purchased a used SP-300. It came with a program called Colorip. I figured out most of it but am stumped at one thing. When trying to cut vinyl it keeps cutting off the last letter and cutting a line through the first one. I have loaded a 24" roll of black vinyl. In set up it shows the size of the letters is 21.4. on the printer the width of the vinyl is 23.2. That seems like it should fit fine, but it keeps cutting off the end of the last letter. If you click on Print Queue, Layout,…
Continue Need help with Roland Versacamm SP-300
Posted on November 18, 2011 at 10:55am 16 Comments 1 Like
I just purchased a used SP-300. When they ran it for me it appeared to be working just fine. When I got it to my. shop and fired it up it made one good print, but was set to draft. I changed the setting to high quality and tried the same print and that is when the
the blue stopped working. I have cleaned it every way possible (multiple times and it still won't print dark. I contacted Roland and they sent me a test to print. The red and yellow are fine. he black looks brown and the…
ContinueComment Wall (1 comment)
- At 7:32am on November 18, 2011,
Admin said… Marianne,
Welcome to MyVersaCAMM.com. Please check out our forums or visit some of the blogs for helpful information. Share some of your experiences and pictures with us or start a forum question of your own for some help from other members. We are glad to have you here.
Thanks for joining our community!
Steven Jackson
MyVersaCAMM.com site administrator
© 2012 Created by Adam Yukish.
