Yolanda Swanepoel's Page

"Yolanda - did this get resolved yet?"

"Laura - Your 0110 error is concerning your Linear Strip - The problem is that the error can show for the following reasons: -dirty strip -dirty sensor -failed sensor -damaged strip -disconnected strip The cleanning fluid can remove the coding -…"

"wow... I know you are waiting for Irving to answer but tsk... those nozzles are really jacked!   :(   Signs101 comes up with this:  http://www.signs101.com/forums/showthread.php?t=24284  the third post down by Castek…"

"Hi Irving, Wish I had seen your reply earlier!   I soaked the heads for 1 hour, then did a powerful clean. Waited 5min and did a test print. Then a normal clean and test print. See test print picture...   I opened the printed up again and…"

"THank you :)   I love learning stuff everyday and appreciate people like you taking your time to reply to messages thanks!  <3"

"Thought I was seeing pictures from two sources - I think I have the same issue as the printer - blurry vision - LOL - no problem. Go check your answer concerning your white - LOL"

"Hi Irving.   What do you mean by "if both can provide a nozzle test" ?  There's really only 1 other person in this discussion and that's the OP  and she posted twice :)  I'm having no issues.  But I…"

"Good Morning Folks - just take a pause and please no more cleaning. If both can provide a nozzle test - that would help in (1st Test) addition to your provided prints. (the nozzle test would let me see if the double printing is being cause by…"

"Looks like the media you are printing on is not taking in the ink.   What media are you using?  Do you clean your media prior to printing? Maybe there is some sort of residue on the media that is impeding it's ability to…"

"I would like to add that I have now done a test print: cmyk in the same text and size and I have the same problem with all..."

"Hi Everyone, Thanks so much for all the replies. I thought that I would have to replace / re-align heads, but it was luckily a static error. I unplugged my network cable as well as the power cable to the printer and let it sit for 5min, then…"

"got my money on static issue or maybe an electrical issue in the ribbon cables. Start with static. First picture shows issues with nozzles but more importantly, there are supposed to be 4 rows of nozzle lines per color. You can see it is misfiring…"

"First look at pic one and thought the pumps are not working pic two dirty cap tops pump not working. Pic 3 static looking at pic one again the timing of the heads is way off as well as some missing defects but never seen on top of another one. Seen…"

"I do not make a point of disagreeing with folks on the forum. I try to point out what should be done, based on training and experience. Certain parts of the machine should not be touched unless needed. Care should be taken in directed users to clean…"