Mike Kamper
  • Male
  • Saint Louis, MO
  • United States
Share on Facebook
Share

Mike Kamper's Friends

  • Todd Collins

Mike Kamper's Discussions

Ghost in the machine

Started this discussion. Last reply by Mike Kamper Nov 1. 5 Replies

OK, those of you that have read my previous posts, I am brand new from the cartridge to the ink pump so here is something I hope someone can explain to me(see attached) Now keep in mind, I know…Continue

Cyan dampers will not fill.

Started this discussion. Last reply by irving donaldson Oct 26. 1 Reply

VP-300 Cyan dampers will not fill. New dampers, new captops, new ink pumps, new manifold and gaskets but this is what I have. (See picture)I really need some helpContinue

Dampers will not fill

Started Oct 22 0 Replies

I cannot get either new damper to fill when drawing with syringe through cap top tube and feel little if any resistance on syringe plunger. New cap tops, new dampers Roland VP-300Continue

eBay dampers

Started this discussion. Last reply by irving donaldson Oct 15. 2 Replies

Picked these up off EBAY now I have two broken manifolds from trying to install and no replacements for a few days. How do I keep heads from drying out on a VP-300?Continue

Gifts Received

Gift

Mike Kamper has not received any gifts yet

Give a Gift

 

Mike Kamper's Page

Latest Activity

Mike Kamper replied to Mike Kamper's discussion Ghost in the machine
"Thought everyone might get a laugh at the desperate attempts and massive money I have spent trying to get the air leak fixed. This is just this weeks trash, last week was even more."
Nov 1
Mike Kamper replied to Mike Kamper's discussion Ghost in the machine
"Installed brand new manifold, again, new cap top, left dampers off and connected one end of hose to one manifold nipple and the other end to second nipple. Park heads try to draw LIGHTLY with a syringe from cap top line and STILL draw air....PLEASE…"
Nov 1
irving donaldson replied to Mike Kamper's discussion Ghost in the machine
"The pump is located on the other side of the captop So if not on the top ink is not pulled in - it is not a push system In fact it is a closed system so if the line is remove the ink supposed to pull back into the line so that it does not leak all…"
Oct 31
Mike Kamper replied to Mike Kamper's discussion Ghost in the machine
"Why would a manifold issue prevent ink from being able to fill my brand new dampers, when they are not even connected to the manifold??"
Oct 30
irving donaldson replied to Mike Kamper's discussion Ghost in the machine
"Cracked nipple or cracked manifold So much ink, if it gets on the printhead board - toast"
Oct 30
Mike Kamper posted a discussion

Ghost in the machine

OK, those of you that have read my previous posts, I am brand new from the cartridge to the ink pump so here is something I hope someone can explain to me(see attached) Now keep in mind, I know enough about these printers to know it is NOT a blocked damper line and the cartridge was installed today......when I draw from cap top line I get nothing but air WITHOUT resistance HHHEEELLPPPPPP!!!!!!!!!!See More
Oct 30
irving donaldson replied to Mike Kamper's discussion Cyan dampers will not fill.
"Not sure what is up with all that cyan ink all over the place, but when I see that the first step is to check your fuses on the motherboard. Next check that you completely seated the tube before you tightened the brass cap ensure the gasket is…"
Oct 26
Mike Kamper posted a discussion

Cyan dampers will not fill.

VP-300 Cyan dampers will not fill. New dampers, new captops, new ink pumps, new manifold and gaskets but this is what I have. (See picture)I really need some helpSee More
Oct 25
Mike Kamper posted a discussion

Dampers will not fill

I cannot get either new damper to fill when drawing with syringe through cap top tube and feel little if any resistance on syringe plunger. New cap tops, new dampers Roland VP-300See More
Oct 22
irving donaldson replied to Mike Kamper's discussion eBay dampers
"Search on here about the warning on how brittle the nipple of the manifold is. always order a couple when changing the dampers. You can do as mike stated or use a paperclamp and clamp below the top or clamp at the waste bottle - one line. then pour…"
Oct 15
Mike replied to Mike Kamper's discussion eBay dampers
"Use small zip ties and close the caps lines. Pour in some cleaning solution in to the caps and cap the heads. That will keep the heads safe and not dry.  "
Oct 15
Mike Kamper replied to Mike Kamper's discussion eBay dampers
Oct 12
Mike Kamper posted a discussion

eBay dampers

Picked these up off EBAY now I have two broken manifolds from trying to install and no replacements for a few days. How do I keep heads from drying out on a VP-300?See More
Oct 12
Mike Kamper posted a status
"OK guys.Tried my luck on a used cyan print head. I need any and ALL input as to what my next step should be."
Sep 11
Mike Kamper posted photos
Sep 11
Mike Kamper commented on Steve Fernandes's photo
Aug 20

Profile Information

Hometown: Please include City & State
Saint Louis Missouri
Core Business
Screen Printing
Your Position
Owner
Website:
http://inkstl.com
Type of Printer/Cutter if owned:
VP-300
Type of Heat Press if owned:
GEO Knight

Mike Kamper's Photos

  • Add Photos
  • View All

Comment Wall

You need to be a member of MyVersacamm.com to add comments!

Join MyVersacamm.com

  • No comments yet!
 
 
 

© 2018   Created by Steven Jackson - Admin.   Powered by

Badges  |  Report an Issue  |  Terms of Service