Hello , i having a problem with my xr640. Printer was unused like 8 months approximately. And few days ago i started it again. And im facing a problem. Before i try to use it. I cleaned everything.…Continue
"Without being there and know what got it to that state it is hard to say. If it was not plugged in and ink removed, then you have the head clogged with ink. If a 48hr headsoad did not move it or moved the ink enough, then maybe another 48 hours. The…"
"Hello i did everything but still very bad results. I soak head did power cleaning. But still head a do nothing and head B printing 4 colours. This is how brand new head tops looks now . https://ibb.co/PwXR3XNhttps://ibb.co/1JGDggB"
"You can search other post where I posted many times on headsoaks. But what you need to do briefly:
- unplug machine
- clamp hoses under tops
- unlock head
- Move head
- fill tops with OEM cleaner
- Return Head
- Lock Head
- after 24 hours check and…"
"Really thank you Irving for helping out :) yes i found a hole under machine with bolt which should be adjusted with crank tool. Now i can make a normal Head soak. But the question is : when i fill up cleaner on captop all cleaner absorbs fast to…"
"the waste side does not have ink unless the pump is sending waste ink from captops
I would have to look your machine up - if it is the older one - then you need the crank tool to lower the cap station - then move to the left - fill with cleaner -…"
"Yes its a waste side. I did soak but im not sure it was correct way I did it. Because i cant move a head like on youtube videos. To push for unlock and do other steps. Can you tell me please how to do perfect head soak on xr 640 ?"
"I would do a head soak, because nothing to lose and not on for 8months is ink dried in the nozzles. You are pushing more ink possibly into clogged nozzles so something will give. On the other hand, the fuses may be good because the head is not…"