Hello,First of all, I apologize for my weak English.I have a problem with the Roland XC 540 printer.When I print, the magenta channel drops out (test print in the enclosure). I checked the whole pipe…Continue
"Apologies for we are not here to teach you how to be a tech. If you changed your own dampers you might have cracked your manifold and drawing in air. As for the head, it was reference to replacing the head."
"Not sure what you mean by changing the filter. If by filter you mean damper, then yes - change the captop. The picture shows it needs a captop - if it is printing fine and then drops out - a bad captop will not suck in enough ink. If it still…"
"Hi,I changed filters and the problem still persists.I start with printing and after approx. 1.3 m the problem with dropping magenta repeats.Should I replace the head parking? can this problem cause a bad cap top?Well thank you"
"OK the other channels are great. You will have color drop with that nozzle test.
How old are the captops?
If tops are old, then the pumps cannot pull enough ink into the dampers
If the tops are new, then the dampers (at least one magenta)…"
Hello,First of all, I apologize for my weak English.I have a problem with the Roland XC 540 printer.When I print, the magenta channel drops out (test print in the enclosure). I checked the whole pipe or there was no air. Everything is OK. I do not understand, because this error occurs after printing about 2m and sometimes in general.Can you give me some advice? what could be a problem? can it be CAP TOP? Or Dumper on the megantha channels?Thank you for any advice.…See More