Hi I have run into a serious issue in my sp540v and don't know how to get it fixed or what need to be fixed. Please I really appreciate anyone's comment/advise to find a way to get the printer…Continue
"If the transistor is bad, it will normally show 0 across the legs and be warm to the touch. Another thing that you can check is the data cable from the mainboard to the carriage board. This cable was prone to splitting between the wires and having…"
"Thank you Butch for your response. The printhead carriage board I took it off to have a closer inspection and it looks pretty clean, neat and tidy, no color changes on the board or components. I was trying to upload a picture of it to my forum post…"
"Thank you Irving for your reply. I too have never read an issue like this in all the forums and Google searches I have done, its either one head or both heads but not just one channel from each head like my issue :( I really hope someone will give…"
"I would check the print carriage board if you don't believe it is the main. The board is the least expensive of all the boards. Easy to replace and is the last connection between the other boards and heads. In my past experiences if one the…"
"Kris this is the best way to reach me. I do not answer chats, PMs or friend requests.
Your issue I have never seen - and you are seeking assistance on one of the 1st printers Roland manufacture. My ability to research it with Roland are limited.…"
Hi I have run into a serious issue in my sp540v and don't know how to get it fixed or what need to be fixed. Please I really appreciate anyone's comment/advise to find a way to get the printer working. Printer has been working really good for many years until last week when I switched it on and did a test print to see the following test print.. The Yellow and Blue test…See More