About a week ago i noticed ink leaking from the head during a print. So did some research and checked the damper. As I removed everything the damper was leaking. Replace damper leak stopped but print…Continue
"If you ask then you probably did not do it.
To close the choke valve to not leak ink, you close the valve in service mode and again service mode to open.
If you spill ink on the board you break the head, if you do not ground yourself or short…"
"Yes I choked the system but i did notice some air in the line still.
Yes during the install i had a towel down to catch ink. I did not see any ink drip down to board
No ink on the cables .
Is there anything beside PrintBoard it could be?
"VS, you likely dropped ink on the PrintBoard and fried it.
In doing the damper - did you choke the system
When you pulled the damper - did you have papertowel or cloth there to catch any dripping ink
Did the ink drop on the board on the side…"
About a week ago i noticed ink leaking from the head during a print. So did some research and checked the damper. As I removed everything the damper was leaking. Replace damper leak stopped but print head will not print. During install I forgot to unplug the printer but printer was off not sure if that matters. Checked the 2 fuses on the main board tested good. check firing order on print head to make sure it was correct. Please help.See More
"Usually cleaning during printing comes from third party ink when the machine feels it needs more cleaning. If all you have is OEM ink - then you might be losing a sensor - If you have new carts - replace one at a time to see if you can localize…"