I have come to the conclusion that magenta is being consumed at a higher rate because of the recirculating pump. It appears that the y actually allows the captop pump to draw twice as much ink in…Continue
You have a number of issues that a tech would have identified in the beginning based on knowledge and experience. Knowledge and experience can supersede being smart.
Your printer may not be level as the ink is pooling along the edge…"
There are limit to what can be stated and answered in the forum. Second and third tier questions are avoided for the most part which is why you are not getting direct responses.
The cost of the print head is rather expensive as you already…"
"You go Girl with your troubleshooting skills.
Yes, swapping the chip would identify which chip is defective. Make sure that you mark everything so you don't get mixed up.
Label it good or suspect. Once it is verified then label its…"
"Yeah, you won't see it in the System report. It's in the History Report and it is in the service menu which is a privileged menu.
Download the Peck tool and run that tool to generate the history file. Post it and we can ask…"
"Wake it up and see if it goes back to sleep wait a while and pull the report and verify the numbers.
If it increments then you know the program login is working.
There is somewhat of a contradiction in that the manual requires manual…"
"Is your sleep mode enabled or disabled? and what is the time interval.
I would test its ability to sleep and wake up.
Pull a system report before you leave today
In the morning pull another and check the auto clean count and the sleep…"
Greetings, welcome to MyVersaCAMM. We are a friendly community assisting with the production of products from the Roland VersaCAMM. Feel free to scour our resources, ask questions, offer your assistance or experience. We look for you to have a pleasant experience. Catch you down the road, Happy CAMMing!