Hello All,I am new to the group and thanks for having me! I have an SP300 that has been unused for about 6 months. It was working well, and I have done a cleaning every time it asks. I wanted to…Continue
"True but I have to bypass switches while on jobs waiting for parts. Only reason why I told you. There are areas where you can blow fuses, but those printers only carry about 4 fuses - it is either on, or off. Just let me know how you make out. Your…"
"When I got the machine I replaced the heads, captops, dampers, pump, and a few other items. I found the sensor test in service mode, and the pinch roller up/down sensor seems to be the problem. I removed it and cleaned the optics, but no…"
"Aha, so actually the plot thickens. You have 3 blue rectangles on the bar on the right and another 3 or 4 on the left. The media has to be under 1 on the right under the end pinch roller and one on the left under another pinch roller. Do not use the…"
"Thanks for the reply. I do know how to get into service mode, I bought the machine in need of repair and got it working well. I am using standard Oracal vinyl. I did move it to a different spot since the last time I printed, so there could be a…"
"I cannot tell you how to get into service mode - but there is a sensor test in there. Which media are you using? Ensure no light is shining directly on the sensor. Also do not use - the Stahls subistop with the charcoal liner for the test. Make sure…"
Hello All,I am new to the group and thanks for having me! I have an SP300 that has been unused for about 6 months. It was working well, and I have done a cleaning every time it asks. I wanted to print the other day, and it won't move on from "setup sheet". I tried to do a test print and it read "no media loaded". I figure it is probably a bad front or rear media sensor, or maybe a bad pinch roller up/down sensor. Does anyone know of a way to determine which it may be?CarlSee More
How is everything with you, I picked interest on you after going through your short profile and deemed it necessary to write you immediately. I have something very vital to disclose to you,but I found it difficult to express myself here, since it's a public site.Could you please get back to me on ( email@example.com ) for the full details.Have a nice day Thanks God bless.