"As a way to determine your cutting strip if it is the issue, or while you wait for one to arrive; place packing tape over the strip to see if it helps. Which degree of blade are you using 45 or 60? remove the blade holder take a picture and post…"
"Well I would also need to see your print/cut test to see if that is tune in.
Your contour cut is good, you need to increase your perfcut force - go up another 10
Also how much blade do you have out - need to be about a double credit card - too…"
"Thank you so much!
on a simple cut it is now cutting perfect like a square and circle but for the more curvy designs it is not cutting very clean and i slowed down the speed to 20 & have cut contour and perf cut. I have attached pictures…"
"This is how I would do it front to back.
Get my Cut force from the test cut function on the machine
So let's say new blade the force for a good clean cut is 60gf
With the file loaded, open the Cut Controls in the VW
You can do the cutting…"
I am having such a difficult time trying to cut out some decals with the perf cut.i just opened a new blade this is what i have my settings atPerforated length- 2.200 (i have also tried "1")perforation force- 180 (i have tried from "140-240)Half-cut length- 0.030Half-cut force- 1I am either getting a super messy cut or NO CUT AT ALL.I have read many of your post and tried them and still have no luck :(Any advise?See More