A Digital Printing Network
Wrapping coolers
What is the best way to wrap a cooler, and what material would you use?
Replies to This Discussion
-
Permalink Reply by Steven Jackson - Admin on -
Arlon 8000 DPF - it will stick to just about anything.
-
Permalink Reply by Dennis Dunning on -
I have used Arlon 8000 DPF on a rough surface, like that of many coolers, and it works very well.
-
Permalink Reply by Richard Ledenican on -
Oracal HT high tack is made specifically for such applications. Comes in both calandered and cast. Recommend cast for longevity but calandered is fine for most applications which are relatively flat. a little pricey but simply bid it accordingly. we wrap a lot of vehicles and do not use oracal wrap material because of it's higher than normal initial adhesion. If their wrap material is that sticky you can imagine what their hightack must be like.
© 2013 Created by Steven Jackson - Admin.
