Starts up fine, checks paper fine, but when it starts to print, it powers off leaving the carriage in the middle. The machine is able to restart after I turn off/on the main power, then subpower and it would turn on as if nothing happened.
NOTE: In Service Mode the machine will print normally.
I am looking for suggestions.
Could be a heating issue. Heaters do not come on in Service Mode.
Really perplexed. I’ve tried a few things.
HERE is the PERPLEXING Part… I ran test prints from the printer and heater and dryer heats up and prints (see sample).
common main board issue. needs a main board
Main Board on order.
You guys are the best.