A Digital Printing Network
VP300 Not printing solid colors and splatters
My VP300 all of a sudden stoped printing solid colors and splattering. I have cleaned the machine, changed the wipers, cleaned the scrapper, turned it off and unpluged it for a half hour, wiped the deck doun with a dryer sheet. It does this on all types of vinyl. Any help. Two pictures attached. Need any help I can get.
- Attachments:
-
-
DSC00038.cpt, 3.1 MB -
DSC00037.cpt, 3.3 MB
-
Replies to This Discussion
-
Permalink Reply by Butch on -
Did you check your bi-directional adjustment and calibration ? Did you check your profiles and q settings to make sure they are not over riding each other.
-
Permalink Reply by irving donaldson on -
Ok John did anything that I PM you help. The pictures you sent were great of the tests and your two prints look good on the computer.
How are they in person?
Two comments on your tests -
One the Cyan is not printing correct and the range you showed me I do not like in any of the test. I will check something prior to posting. Your black looks aligned in the test but your calibration test looks like crap and if I did not see your nozzle test I would say your black printhead is going? So recommendations are to print the same files uni-directional and to print them again in bi-directional at high quality.
-
Permalink Reply by John Brehm on
-
The two prints are not printing solid colors. When you see them in person you can see the differance.
- ‹ Previous
- 1
- 2
- 3
- Next ›
© 2012 Created by Adam Yukish.
