The VersaExpress is not printing at all i.e. test print is blank. We were having some problems with ink leaks from the head when printing and changed the damper but unfortunately now it is not firing at all. Please help.

Views: 23

Reply to This

Replies to This Discussion

Ink leaks are usually a faulty damper

however in changing if you spilled ink on the print board or any ribbon cables you will either break the head or short the fuse. Fuse is located on the mother board and should be checked.

RSS

© 2018   Created by Steven Jackson - Admin.   Powered by

Badges  |  Report an Issue  |  Terms of Service