So this past week I had over 100 shirts to make with some serious weeding and after doing about 10 quick prints and weeding, I thought to myself there is no way I am going to do 100 of these and make any money.
With a quick suggestion from Steven, he told me to get some heat transfers made which is basically the same as screen printing. I quickly had some made and had it overnighted to me. Because the characteristics of this is different than quickprint, I found myself with issues "around the back of the collar" With the quickprint I use a pillow there so that the collar does not show up in the back when I press it. It is worse with the plastisol heat transfers, but another call to Steven "which he was happy to hear from me and was eagar to help" he gave me about 3 different solutions. 2-3 hours later I was done with the whole job!
I didn't really get to thank Steven Properly as I was pressed for time on the phone as I had all these shirts to press, so I wanted to write this little public Thank You to Him. Thank You Steven for your help and your hospitality to me.
I'll try and post some pictures up later.