MyVersacamm.com

A Digital Printing Network

Seramark application ?

I have a question about applying seramark on a indoor wall. I have an order for one that is 4' x 8'. My question is should I apply mask then apply to the wall or can I just put the seramark on the wall without mask. 

Any advice would be nice. 

Thank you in advance for your help!

Tags: Seramark

Views: 57

▶ Reply to This

Replies to This Discussion

Permalink Reply by Steven Jackson - Admin on January 3, 2012 at 6:49pm

both will work. I have done a huge wall mural with no mask and smaller ones with. It is not necessary but some find it helpful

Permalink Reply by Adnan Majid on January 3, 2012 at 7:13pm
What about air bubbles. Should I use the squeegee directly on the seramark. 
Thank you
Permalink Reply by Steven Jackson - Admin on January 3, 2012 at 7:32pm

i use a felt squeegee, if there are bi=ubbles, simply lift up the media and reapply it. It is a removable media.

Permalink Reply by Adnan Majid on January 3, 2012 at 7:33pm
Thank you for help

RSS

© 2013   Created by Steven Jackson - Admin.

Badges  |  Report an Issue  |  Terms of Service

Sign in to chat!