Hi,, I took the yellow/magenta damper off and squirted fluid in head to clean and put new damper and captop on and now will not print anything

Any Suggestions

Views: 62

Reply to This

Replies to This Discussion

Sounds like:

Blown fuse, or

Blown printboard, or 

Blown head

where are the fuses located ? everything was working good except head clogged a little 

If any cleaning fluid at all hit the head circuitry the head is toast. Pushing fluid thru the head usually damages the head anyway. So my guess is blown head, blown fuse and possible mainboard damage. 


© 2018   Created by Steven Jackson - Admin.   Powered by

Badges  |  Report an Issue  |  Terms of Service