Hi Everyone,

I recently had an issue with my Roland VP540 Printing vertical black lines. Attached are the images for the same. Any thoughts to fix this would be appreciated.



Views: 62


Reply to This

Replies to This Discussion

Communication error

How many jobs in your queue

What is the size of your hard drive and how much room is remaining

Is the cable from printer to computer fully seated at both ends

is the power cable in the back completely seated and to the wall plugged in

What is your operating system

Did it just start and what happened just before it was noticed

Steady or intermittent

Thanks for your reply Irving,

Have checked the cables - Tried to do a test after disconnecting the network cable but its still the same. I am on windows 7 - with ample hd space. Have checked the cabling, Attaching the latest image after a test. 


Based on your PM, again there is a cable working itself loose!

That is block banding - different than the other communication feedback. That comes from the printhead cables not being aligned parallel and secured to the housing - that does happen on its own but through touching!

Thanks a  lot, I ll check on that and see if the problem is fixed. 


© 2018   Created by Steven Jackson - Admin.   Powered by

Badges  |  Report an Issue  |  Terms of Service