A Digital Printing Network
Problems with Oracal Vinyl
Need some help, I was doing same decals with some detail in the logo. The print came out fine. When it started cutting the larger parts they cut fine, but when it got to the smaller detail parts and also letters with shading, during the cutting process these parts of the logo wanted to peel up on one end. I hope you guys can tell me how to fix this problem. I have used this material loads of time and this is a first. THANKS FOR HELP
Replies to This Discussion
-
Permalink Reply by Kevin Hirata on -
Mac,
I ran into the same issue about a month ago when I was doing a round decal with 1/2" text around the outside. I was surprised when the text lifted up after cutting. I guess I had gotten used to cutting apparel vinyl and never having a problem with 1/2" text lifting up. I tried slowing he blade speed, but that didn't help. We finally ended up not doing a contour cut around the text, but instead just cutting a circle around everything, including the text.
I know this doesn't really help you out, but I though I'd share my experience. Maybe you can try to do a cut>print, rather than a print>cut and see if that works.
-
Permalink Reply by Steven Jackson on -
Mac,
Can you post a picture of what it is doing and maybe the file you are using? I can try to duplicate it and see what is going on.
Thanks,
~Steven
© 2012 Created by Adam Yukish.
