A Digital Printing Network
printing a banner 4' tall with a 30" printer-how to print extra bleed?
I am printing a 4' x 8' banner with a 30" printer. I was wondering is there a feature in Versaworks that I can select to give me extra bleed where the bottom of the top 30" banner will meet the top of the botom banner? (Yeah I know this sounds confusing). Otherwise I can divide it into 2 part and save it that way in Corel.
Thanks for any advise:)
Replies to This Discussion
-
Permalink Reply by CYW on -
Kim, how are you going to put the 2 pieces together and not go out of your mind keeping everything straight and aligned for 8 feet?
Lady Di
-
Permalink Reply by Kim Lynch on -
I never said I won't go outta my mind (LOL) I with use double sided banner tape. I've done this before but in my artwork in Corel i have created the 'bleed", but I think I'll just do it with the clip and tile option in VW.
Thanks
-
Permalink Reply by Mike F on
-
I would honestly outsource this if you can, I'd be too afraid of it failing from being taped together like that. If you can't or don't want to outsource, the "Clip and Tile" tab under your Versaworks job settings should do the trick for you.
© 2013 Created by Steven Jackson - Admin.
