A Digital Printing Network
Printer is Still "Processing..."
I have a SP-300i which i just recently saw this morning doing its routine clean, then it suddenly stops with a message on the LCD screen which reads "Processing..." this has probably being going on for the last hour or so...
this is the second time so it's starting get annoying when it is also making that high pitched squealing noise.
Replies to This Discussion
-
Permalink Reply by Butch on -
turn off the sub power and main power let it set for a few minutes fire it back up - should return to normal operation
-
Permalink Reply by CYW on
-
Happens every now and again.......No rhyme or reason that I can figure out
Like Butch said, Turning the power switch off and back on, kicks it back into shape
-
Permalink Reply by irving donaldson on -
Daniel that is abnormally normal, all but the high pitch squealing noise. When it happens just power down (you can hold the front button or just turn off the main power and power back up). Can you identify where the squealing is coming from? This sometimes happens during printing - causes for those - bad files in your que; and connections interruptions are the likely culprits.
-
Permalink Reply by Daniel Lee on
-
Checked the files, and the ques are clean. And i've tried holding onto the power button at the front and also tried holding it down till it shutdown. Both methods did not work. It seems that the connections are also okay. It's the exact same noise i hear when i prepare the printer for a head clean and makes that high pitch squealing noise. But what i had done was powered off from the back of the printer. I haven't turned it back on since turning it off.
-
Permalink Reply by irving donaldson on
-
Turn it back on - is your VW - up to date
© 2012 Created by Adam Yukish.
