A Digital Printing Network

paper for 30 inch laminator

We are getting the 30 inch laminator and after a call to imprintables the paper only comes in I think he said 51 inches. Where can I get 30 inche paper for my machine? Has anyone else run into this problem?

thanks for any information.

april

0 members like this

▶ Reply to This

Replies to This Discussion

Permalink Reply by CYW on March 14, 2012 at 9:16am

Same here Roland, except instead of coroplast, I use a cut of piece of an extra 'sticky' sheet from my flatbed cutter as a sled........obviously without removing the protective covering paper on the 'sticky' sheet!

The thickness is just perfect for a sled and the laminate doesn't stick to the protective coating that those sheets come with

One 4 inch strip last forever.

If I still need a little extra at the end of the run, I use a piece from a previously laminated run. There's always extra because you need a few extra inches when putting the lamination back into the machine to cut.

I save all those strips

Use them a few times and when they become 'overly' laminated, I just chuck them

Nothing 'extra' to buy and no dealing with paper crinkling or sliding underneath your vinyl while laminating