MyVersacamm.com

A Digital Printing Network

Lock the VP-330I Head (Please help ASAP)

OK, Ready to move the Versacamm today and not sure what it is that locks the head? Is it something that came with the unit and I just don't know what I am looking for? Trying to move today but not sure what I need. Any help would be great. My # is 941-416-0772

Views: 4

▶ Reply to This

Replies to This Discussion

Permalink Reply by Steven Jackson on August 20, 2010 at 6:27pm
It is a small blue metal bar that should be screwes to the back of the machine.
Permalink Reply by Luis v on August 20, 2010 at 7:51pm
It looks like this. See attached file
Attachments:
Permalink Reply by irving donaldson on August 23, 2010 at 5:55pm
Hey Matt was this resolved?
Permalink Reply by Matt Vassallo on August 24, 2010 at 4:40pm
Hey Irvin ,tonight is the night we are going to try the move. I see the blue piece in the back but can't find were to attach it to lock the head in place. Anyone have instructions at all? All of my books are packed in boxes at the store somewhere in the moving mess and I can't find them.

Thanks Matt
Permalink Reply by irving donaldson on August 24, 2010 at 6:56pm
Matt, the blue steel piece screws into the lower platen on the right side of the machine. Look around the 1st blue block and you should see the place for the screw, All of the other holes are not threaded. On mine it looks to be about the second screw in.
Permalink Reply by Matt Vassallo on August 24, 2010 at 8:47pm
Thanks Irving, It has been pouring all night long so we have to hold off until the AM. Thank you for the info! We will see how it goes in the morning.
Permalink Reply by irving donaldson on August 24, 2010 at 10:24pm
Matt it should work out for you the blue device is screwed on with a white thumb screw in the ink cartigage area. I am sure you have that by now. It screws into the threaded hole (2nd in) on the right side by the cutting head. If that does not work for you for what ever reason. Foam (not styro) placed on the platen near the head would work to secure it. That would replicate the foam that they place near the pinch rollers during shipping.
Permalink Reply by Matt Vassallo on August 24, 2010 at 10:55pm
Awesome. We will give it a go tomorrow. Thank you so much for all of the help!
Permalink Reply by irving donaldson on August 26, 2010 at 10:23am
And the answer would be
Permalink Reply by Matt Vassallo on August 26, 2010 at 11:32am
The move was perfect. Just locked the head. Took off the drain bottle and put a towel down. Took it off the stand and in the back of the wife's mini van for a smooth ride. Hooked it up at the new shop and started right up. Was printing within minutes!! Thanks for the help!!!

RSS

© 2012   Created by Adam Yukish.

Badges  |  Report an Issue  |  Terms of Service

Sign in to chat!