I would like to know if someone can give me an estimation on the amount of ink used per sq/m of print?

I know there are many variables, but a very rough estimate would be appreciated.

Views: 24

Reply to This

Replies to This Discussion

it is dependent on the graphic used. You can rip the job after it is all set up and in the center information column it will tell you how many cc's (ml) of ink will be used. It is about $0.32 per ml here in the US

I had a look, but it is only the print area etc. that shows in the centre column. Is there anywhere that this could be set?

RSS

© 2017   Created by Steven Jackson - Admin.   Powered by

Badges  |  Report an Issue  |  Terms of Service