Had a roland tech out to fix a cut calibration issue- long story- but ended up with a front cover open error. While he ordered parts to fix that error, he soaked the heads to avoid them drying out. Today when he went to put it all together ink had sucked way back in the lines and contaminated. He pulled a bunch out but told me to run black and yellow to get contaminate out. I’ve run this (should be black squares... obviously it’s blue) - circles are supposed to be yellow. Running in service mode. SP300V. How long should it take to clear lines with these prints? Am I going to hurt anything by continuing? Thanks.

Views: 37

Reply to This

Replies to This Discussion

Tried to add a picture- it’s not letting me here- but I’ve printed 12 rows of 2” squares that should be black and are all royal blue. Yellow circles come out light red.

RSS

© 2018   Created by Steven Jackson - Admin.   Powered by

Badges  |  Report an Issue  |  Terms of Service