A Digital Printing Network

How do i solve blurry effects on the print after 10to 12 cm

How do i solve blurry effects on the print after 10to 12 cm on roland vs 640

Replies to This Discussion

Permalink Reply by ELSIE ADHIAMBO OTIENO on February 8, 2012 at 1:58pm

i have a ROLAND VS640 printing machine, i have been having problems since this morning, while printing, it give a burry image on the print after very 10 to 12 cm of print a and the words smudge while printing

u have 10 banners to print tonight and a so stuck can someone help me please

▶ Reply

Permalink Reply by ELSIE ADHIAMBO OTIENO on February 8, 2012 at 2:21pm

u have 10 banners to print tonight and a so stuck can someone help me please

Attachments:

▶ Reply

Permalink Reply by Priscilla Grant on February 8, 2012 at 3:22pm

It looks to me like you have bi-directional misalignment while printing. You may need to adjust your Bi-Directional Printing through your menu. Do a Bi-Directional Test Print and then adjust accordingly. I'm not sure how to do that for a VS640 machine since I have a SP300V but that would be my first guess. Check your manual.

Hope that helps!

▶ Reply

Permalink Reply by Admin on February 8, 2012 at 5:53pm

It looks like a dirty encoder strip to me. It appears at the same point consistently in the print so it is either a bad roll of media or dirty encoder strip - try printing on a different media and see if you get consistent results.