HI ALL BATTLING TO UPDATE MY FIRMWARE FROM VERSION 4.3 TO 4.8

WHEN I TRY DOWNLOAD FROM THE ROLAND SITE IT TELLS ME MY MODEL

OR SERIAL NUMBER IS INVALID . I HAVE DOWNLOADED FIRMWARE BEFORE

WITHOUT A PROBLEM.

IF THE MACHINE IS TO OLD WOULD THIS BE THEPROBLEM .

WOULD APPRECIATE ANY INPUT , THANX

Views: 54

Reply to This

Replies to This Discussion

Nope that would not be an issue - PM me your serial number and is 4.8 the latest?

thanks irv dont know how but we did in the end manage to download it . still having problems though

the feed motor seems fine tested all the wiring ,opened motor up . funny thing , when i command a test cut the printer does it perfect , but immediatly after cut the vinyl is rolled out the machine and the rollers wont stop till i power off printer , so as soon as i touch the up or down keys she feeds and wont stop . i did find someone who had the same problem on another blog they said they had a broken wire and it sorted out the problem

hence me testing continuety of all wires that go into the back of the motor, could it be a fault in that infra red sensor

on the back of the motor . [i asume its infra red ] . wierd that the motor is working fine on a test cut , but as soon as finished , or if commanded to either on the up down keys or before printing when the grit roller is engaged it just wont stop

RSS

© 2018   Created by Steven Jackson - Admin.   Powered by

Badges  |  Report an Issue  |  Terms of Service