Views: 43

Reply to This

Replies to This Discussion

Where is your nozzle test

Not sure how to add the picture here. I messaged you with images.

OK disregard my message - now I got it. 

You need to fix that missing channel to get your proper test. 

Check for air in the lines; damper; captop

Is the machine level

Is the head sitting squarely on the top

Try a powerful clean and then the nozzle test, if good then do the test

Which channel is missing? Not sure what I am looking for. Is it the clear tubes.

Chris your machine has 2 heads - 8 channels each.Your A side shows 8 channels, while your B side shows 6. You are missing a complete damper. Solve that and you will have the test print you are desiring.

RSS

© 2018   Created by Steven Jackson - Admin.   Powered by

Badges  |  Report an Issue  |  Terms of Service