A Digital Printing Network
CYMK over CYMKlmlc
Another daft question I bet...I am trying to print a job that was held by another printer with a straight CYMK fomat machine. I cant get one of the colours, it is using too much light cyan rather than normal cyan with a dash of yellow, the result is the logo is coming out with a green cast. My question is on the VS540 can I force it to print cymk only? using veraworks btw
Thanks
Replies to This Discussion
-
Permalink Reply by Steven Jackson - Admin on -
cam you post the file and a picture of the results? We might be able to diagnose a better solution as there is no way I know of to force it into CMYK alone.
If it is a yellow you are trying to hit I think it may be a separate issue that can be solved.
-
Permalink Reply by Ron Fothergill on -
Away from the office at the mo but will post a pic, colour trying to hit is around a pantone 631
Pantone 631
CMYK equivalent = 67 / 0 / 12 / 2
even when I remove all the yellow the colour still has a green cast :O(
© 2013 Created by Steven Jackson - Admin.
