VP-300 Cyan dampers will not fill. New dampers, new captops, new ink pumps, new manifold and gaskets but this is what I have. (See picture)I really need some help

Views: 55


Reply to This

Replies to This Discussion

Not sure what is up with all that cyan ink all over the place, but when I see that the first step is to check your fuses on the motherboard.

Next check that you completely seated the tube before you tightened the brass cap

ensure the gasket is seated and not blocking the line 


© 2019   Created by Steven Jackson - Admin.   Powered by

Badges  |  Report an Issue  |  Terms of Service