Trying to cut Stahl's white Opaque seems like it just tearing the product. Am using 45 degree blade 90 GF. BN-20

Has any body had the same problem and what do I need to fix this problem.



Views: 182


Reply to This

Replies to This Discussion

Good progress, remember test cuts are important, blade should be out of holder approximately 1 credit card thickness.

I often follow Irv's advice to cut, return to the origin and then print. This makes me wonder once again why VersaWorks doesn't have a Cut and Print option similar to the Print and Cut option.


© 2018   Created by Steven Jackson - Admin.   Powered by

Badges  |  Report an Issue  |  Terms of Service