A Digital Printing Network
contour cut
I was wondering if someone could tell me how to adjust my contour cut, it's way off all of the sudden and never have had to adjust it. I totally forgot how to do it when they explained it when they set up the vesa camm over 2 years ago.
Thanks!!!!!
Replies to This Discussion
-
Permalink Reply by Kathy MacMannis on -
Adam, I think you are referring to the calibration of the print/cut, not contour. Contour means that you have put an additional line either to the inside or outside line like we do in corel draw. I just looked it up in the manual, you need to go to cutting menu, then print/cut adjustment, then perform a test print and cut. You can then adjust in small increments up or down, right and left until your print/cut sample is perfect. I have to do mine every few months. Irv had a great way of explaining it to me since I think the manual is very confusing, but I don't know that I can explain it properly. Maybe Steve can do a "training time out" video.
Kathy Mac
-
Permalink Reply by Steven Jackson - Admin on -
all of the calibrations are on the list for TTO videos but it will probably be next month at the earliest.
© 2013 Created by Steven Jackson - Admin.
