Hi everyone

So I have my Roland VP-540 where the cyan and black haven't been printing at all. 

After trying all of the cleaning and part replacement I finally went ahead and got new print heads.

Upon installing them according to the manual etc. the cyan and black still aren't printing or firing at all. 

Any idea what else could be wrong? 

Many thanks in advance 

Views: 114

Replies are closed for this discussion.

Replies to This Discussion

We do not discuss service level repairs. I will outline somethings to ensure you did cover. Very seldom 2 heads go out at the same time. You will get partial printing from any one head, when you loose both black and cyan, those are controlled by one fuse on the motherboard. You can swap the yellow and magenta cables to see if the head fires, but if it is a head problem, then you will be blowing the other fuse too.

RSS

© 2021   Created by Steven Jackson.   Powered by

Badges  |  Report an Issue  |  Terms of Service