. I have an SP300i and all the heads are working good apart from the black. As this is the same head as the cyan, could the problem sill be caused by the capping station? or should I try and replace the damper or both. It looks as if the black is only firing on 50% of the nozzles. I have tried cleaning and head soak without success, Please Help!

Views: 58

Reply to This

Replies to This Discussion

Post the nozzle test

I hope I found how this works now. Nozzle test, Hope you can help


© 2020   Created by Steven Jackson.   Powered by

Badges  |  Report an Issue  |  Terms of Service