A Digital Printing Network

Bad cutting strip

After trying everything I was advised it appears my cutting strip is bad in a certain area. Is this something I can change myself? I looked in the manual and couldn't find anything on it Thanks for all the help.

David

0 members like this

▶ Reply to This

Replies to This Discussion

Permalink Reply by Steven Jackson - Admin on June 28, 2012 at 11:20am

David - you can easily replace it yourself. The cutting strip pulls off (it has adhesive on the backside) and then a new strip is adhered into the channel it was in. You can order a new one from Imprintables.

▶ Reply

Permalink Reply by David Casterella on June 28, 2012 at 11:48am

Thanks Steve

▶ Reply

Permalink Reply by Butch on June 28, 2012 at 11:51am

Use a weeding tool to lift up one end and pull from the track. Clean the track of any adhesive left from the old strip. Replace with new. Go back to work.