A Digital Printing Network

Adding Media profiles in Versaworks

Here is a quick video on how to add different media profiles into Versaworks. Let me know what you guys think!

Thanks,

~Steven

0 members like this

Attachments:

Adding a media file in versaworks.mp4, 9.8 MB

▶ Reply to This

Replies to This Discussion

Permalink Reply by Bob Zimmerman on December 11, 2009 at 8:50am

Great Job

Thanks
B ob

▶ Reply

Permalink Reply by John Brehm on December 11, 2009 at 12:35pm

Really helped Steve. Thanks

▶ Reply

Permalink Reply by Israel Lopez on December 31, 2009 at 4:08pm

Hello there steven,
I really liked your video and it was very helpful when i loaded all the color profiles that i needed from imprintables. I am trying to permanantly set my Feed calibration controls to printer settings, other controls to media settings and heater controls to media settings in the printer controls menu. It seems that i have to fix these settings every time i load a new job to the versaworks. Any suggestions? Anyone? Thanks for all your great wisdom guys :)

▶ Reply

Permalink Reply by Steven Jackson on January 4, 2010 at 7:38am

Israel,
You might be able to set those under the queue settings. Try going tot the edit tab on the main menu and selecting the queue settings. adjust the proper area in there and hopefully it will fix what you are looking for.

I hope this helps!

~Steven

▶ Reply

Permalink Reply by Israel Lopez on January 4, 2010 at 1:02pm

Sweeeet!!! It works. It is exactly what I was looking for. Thanks man. Your are a life saver.
Keep the good work!

▶ Reply

Permalink Reply by Steven Jackson on January 5, 2010 at 9:14am

My pleasure!

▶ Reply

Permalink Reply by Jeff chavis on July 21, 2010 at 7:57am

Hi, of course I am using a VP540i that I resently purchased
I am trying to print stickers, contour cut them and then cut the backing does this machine have this capability and if so am I reaching try to do this with this machine
Also if this is possible can I perform this task after laminating the stickers??

I am trying to print & cut individual uniform stickers with the backing contour cut as well
Thanks!!

▶ Reply

Permalink Reply by Steven Jackson on July 21, 2010 at 8:42pm

Jeff - you can do this but it is a bit tricky. You will need to create a new color and label it PerfCutContour just like you created CutContour. Apply that to the areas you would like it to perf cut the material. In Versaworks (version 3.3 and later) you will get perf cut controls now in the cut tab. Experiment with different settings and test on your machine to see what pressure you will need to cut completely through the backing.

Hope this helps!