MyVersacamm.com

A Digital Printing Network

Steven Jackson - Admin's Discussions (1,616)

Discussions Replied To (1587) Replies Latest Activity

"Branden - call me (random letters between numbers to avoid spam activity) 51y8tr63n…"

Steven Jackson - Admin replied 1 hour ago to Banding and Grainy Prints w/ Versacamm SP300V on Stahl's ExpressPrint

8 1 hour ago
Reply by irving donaldson

"It should. Let us know if it helps"

Steven Jackson - Admin replied 2 hours ago to Feed calibration results

6 59 minutes ago
Reply by irving donaldson

"It looks good to me as well. The nozzle test print does 2 separate firings from the…"

Steven Jackson - Admin replied 5 hours ago to Feed calibration results

6 59 minutes ago
Reply by irving donaldson

"I have seen them myself recently but have not tried to make one. Hmmm... project tim…"

Steven Jackson - Admin replied 6 hours ago to Sunglasses - using perforated window vinyl

2 56 minutes ago
Reply by irving donaldson

"post a picture of your nozzle test print. You can do a feed calibration with that as…"

Steven Jackson - Admin replied 7 hours ago to Feed calibration results

6 59 minutes ago
Reply by irving donaldson

"you can still bring Pantone colors in and as long as you have Versaworks 4.9 or abov…"

Steven Jackson - Admin replied 19 hours ago to Color Matching and Profile Questions

11 17 hours ago
Reply by John H.

"time to jump in :)First - the icc profiles are needed as, like sublimation, the colo…"

Steven Jackson - Admin replied 20 hours ago to Color Matching and Profile Questions

11 17 hours ago
Reply by John H.

"Download and install the quickprint profile - it should do a pretty good job with Ex…"

Steven Jackson - Admin replied 20 hours ago to Banding and Grainy Prints w/ Versacamm SP300V on Stahl's ExpressPrint

8 1 hour ago
Reply by irving donaldson

"thanks for the info John. I am sure there is someone else out there that will have t…"

Steven Jackson - Admin replied 22 hours ago to Communication

1 22 hours ago
Reply by Steven Jackson - Admin

"make sure your vacuum power is on high and if your model supports it, raise the head…"

Steven Jackson - Admin replied 23 hours ago to Printing on Roland 30" Paper, printhead scuffing.

1 23 hours ago
Reply by Steven Jackson - Admin

RSS

© 2013   Created by Steven Jackson - Admin.

Badges  |  Report an Issue  |  Terms of Service