Dan Gabus's Discussions (147)

Discussions Replied To (139) Replies Latest Activity

"Do you have a picture of one? It looks like there are so many out there."

Dan Gabus replied Feb 7 to Small fonts problem

29 Feb 7
Reply by Dan Gabus

"I have tried 3 blades, bought a new blade holder. I did tighten the cable, but scare…"

Dan Gabus replied Feb 7 to Small fonts problem

29 Feb 7
Reply by Dan Gabus

"Moved it to .600, and it will work. Still not as clean as the original one I did, bu…"

Dan Gabus replied Feb 6 to Small fonts problem

29 Feb 7
Reply by Dan Gabus

"NO, they are Roland blades. The .5 did make it better. I have never changed that set…"

Dan Gabus replied Feb 6 to Small fonts problem

29 Feb 7
Reply by Dan Gabus

".25MM offset is the same on machine and in the VW program."

Dan Gabus replied Feb 6 to Small fonts problem

29 Feb 7
Reply by Dan Gabus

"What settings on the machine?"

Dan Gabus replied Feb 6 to Small fonts problem

29 Feb 7
Reply by Dan Gabus

"I dropped the pressure to 45, and the speed to 10. Same thing. I did these letters b…"

Dan Gabus replied Feb 6 to Small fonts problem

29 Feb 7
Reply by Dan Gabus

"Here are my settings. I have the blade barely sticking out. I ran another job after…"

Dan Gabus replied Feb 6 to Small fonts problem

29 Feb 7
Reply by Dan Gabus

"No, it is still not working."

Dan Gabus replied Feb 5 to Small fonts problem

29 Feb 7
Reply by Dan Gabus

"I just tighten my cable, and it is so much better. Thank you sir."

Dan Gabus replied Feb 5 to Small fonts problem

29 Feb 7
Reply by Dan Gabus

RSS

© 2019   Created by Steven Jackson - Admin.   Powered by

Badges  |  Report an Issue  |  Terms of Service